11 Quotes by Teresa Follmer

You can decide to put a piece in the center and use it as a decorative accent, so we're putting a center tile that matches our edge tiles.

Try to keep them no more than a half inch. Quarter inch is the best.

Try and go with the grain of the wood if we can.

We've got a 24-ounce ball ping hammer we're going to use. The nice thing about this hammer is the weight is going to break the tile for you so you don't have to put a lot into it.

We're going to wipe this down and you want to make sure you have plenty of clean water because you're going to be rinsing, rinsing, rinsing.

We're going to wipe that surface down and get all that residual dust off of there.

We're going to apply into crevices first because we want that area to be a little bit darker.

You're going to sand it using 150 grit sand paper.

This has a binding agent in it so it will help adhere to cabinet surface. A lot of people want to skip this process and go to the painting. The key here is you wont' this coat of primer to be very, very thin. You want to be able to see through it.